• View trends on the display
• View/print history chart any time
• Zoom in and out of chart data
• All data automatically backed up
• Stores over 2 years of history
• Scroll back and forth through data
• Easily spot outliers
• All alarms show on the chart

• Four remote sensors
• Mix & match temp, RH & pressure
• Monitor refrigerators, freezers, etc.
• Optional extreme temperature sensors
• Wired sensors
      Wired directly to the monitor
      Temp, RH, or room pressure
      Position up to 200-feet from monitor
      Display updates every 4 seconds
• Wireless sensors
     9-vdc battery powered (lasts ~ 1 yr)
     Temp, Temp/RH or pressure
     Display Updated ~ every 11 seconds
     Range ~ 60 to 100 feet

• Customizable Dashboard
• Show multiple sensors on one chart
• Data updated every 4 to 20 seconds
• Display each sensor
• Display multiple sensors on a chart
• Displays blink red if in alarm
• Setup dashboards on multiple PCs
• All alarms are logged
• Alarms from the monitor not cloud

Installing the TV2 system

• Position the sensors
• Power the monitor – 120-240 vac
• Set the date and time
• Link or plug in each sensor
• Set the alarms for each sensor

That is it!

Once the data is logged in the non-volatile memory of the TV2 monitor it is impossible for the user to alter it.  It can only be viewed or printed not changed.

Logged data can be downloaded to a PC and saved in encrypted format. Once saved, it can only be viewed or printed.  If the data has been electronically signed the ‘padlock’ icon appears on the chart   A signed chart can only be opened if the same username and password is entered.

Once the encrypted TV2 data has been downloaded to a PC it can be exported in un-encrypted format to ‘Excel’.  Once in Excel it can be viewed and manipulated, but the data is no longer encrypted and no padlock or verification indication is shown.  The padlock and verification pen only appear on printouts or on a computer screen if the data integrity has been maintained.

The TV2 Alarm tracks four different temperatures, temp/RH, or pressures and alerts you instantly if any of them become unsafe. The color of the any variable shown on the display changes to red if it moves outside your safe zone. One glance at the display tells you if all variables are within your safe parameters or not. The color-changing display make training super easy and eliminates the need for employees to have to decide whether someone should be notified if conditions change.

The TV2 QuickCheck display shows four environmental variables.  Any combination of temperature, humidity or pressure along with the maximum and minimum values of each.  

The QuickCheck™display always indicates the safety status of each sensor.  For example, the current temperature along with the maximum and minimum points appear in green as long as the temperature is within the safe range.  However, if the temperature (or humidity or pressure) falls outside your safe zone it immediately turns red until that variable moves back into the safe zone.  Because the color reflects the safety of the room or appliance, a quick glance at the display is all that is needed to see if everything is OK.  The QuickCheck™LCD shows anyone, at any time whether all is well with a single glance at the display.

Text, email or phone-call alert.

The TV2 alarm/logger has an external, normally open (N/O), dry contact relay, to trigger a phone call, external alarm or other devices any time an alarm occurs.  The optional Auto-Dialer calls several phone numbers to deliver or leave a message if an alarm occurs. The external relay can even be wired into a building alarm system.

View full data sheet

Downloads and backs up to a PC with the free secure software

Download and install the free TView secure software on any PC and you can access any TV2 on  your network at any time.  Download logged data on demand or automatically.  This software will find any TV2 plugged into a USB socket or attached to you local area network so data can be viewed or downloaded.