Home about Catalog FAQ Search Contact

Home > Local Alarm > Auto Dialer Specs

Auto Dialer

auto dialer

The United Security Products, Inc., auto-dialer works with the ThermaViewer to provide around-the-clock notification if the monitored temperature moves outside your safe zone for too long.  It will call four or eight phone numbers and leave a message when triggered by the ThermaViewer.

The alarm is surface mounted near the ThermaViewer with two screws or can be attached with Velcro.  It can be mounted remotely from the ThermaViewer but will need an additional power supply in that case
(PW-1).

The dialer is normally powered by the same power adaptor that powers the ThermaViewer itself.  This power adaptor has two barrel connectors to power both the dialer and the ThermaViewer. 

Specifications:

  • Activation: NO or NC, Momentary or continuous dry contact activation.
  • Operating voltage: 9-18 vdc
  • Current draw: 28mA (standby), 100mA (operating)
  • Dimensions 6" x 4" x 1.5"
  • Maximum digits/phone number: 28 (including pauses)
  • Phone numbers stored: 4 or 8
  • Programmable pauses 2sec/pause):up to 10 for pager dialer.
  • Weight: 10 oz
  • Case materials: ABS
  • Warranty: 1 year
autodialer
APD-10
  • 1 separate voice message alarm zones.
  • Calls up to 4 telephones, pagers or cell.
  • 9vdc battery backup.
Auto Dialer

APD-12

  • 2 separate voice message alarm zones.
  • Calls up to 8 telephones, pagers or cell.
  • Built in line seizure, EEPROM memory.
  • 9vdc battery backup.

auto dialer apd-13

APD-13

  • 4 separate voice message alarm zone.
  • Calls up to 8 telephones, pagers or cell.
  • EEPROM message memory.
  • Accepts 9v. alkaline battery.

Technical Support for Auto Dialer 858 413-0149

User manual for APD-10

User manual for APD-12

Wiring Guide for Viewer™ and Dialer-.pdf